Guidelines for making perfect structural design of a lift

Guidelines for making perfect structural design of a lift


This useful construction video tutorial focuses on the following topics :-
  • Arranging MS bar in lift RCC wall 
  • Reinforcement details for lift RCC wall 
  • Studying structural drawing of lift shear wall
As heady loads are imposed on lifts, a strong material is required to tolerate the forces operated by lifts. There should also be a monolithic structure to sustain tensile loads. So, reinforcement in concrete is required for Lift shafts. 

The lift shafts are necessary to be a homogeneous monolithic structure for dynamic load conditions. In most lift installations, lift shaft construction is treated as one of the high priced elements. 

The following are the most vital parts of a lift construction :- 

Lift well: It’s shape is rectangular. There are RCC walls on 3 sides and the opening for lift shutters on the fourth side. 
Lift well should be 150 to 200 mm thick RCC wall and the inner side is just left unchanged. 
No plaster should be provided on the internal face and consequently hacking should not be prepared on the concrete surface. 

Form work: The form work is normally performed in plywood sides. Perfect clamping of the two sides is required in order that the shape of the wall remains as it is. 
Threaded tie rods are provided for clamping to both sides in order that the sides do not come out because of heavy pressure of concrete. 
Tie rods are generally set inside a PVC sleeve in order that the tie rod can be restored after completion of the castings for the walls. 

Lift pit: Under the base raft, there is provision for insert plates to set up the shock absorbers for the lift. 
To get rid of leakage of sub soil water into the lift pit, proper water proofing is urgent. Box type water proofing is generally recommended for the pit.
To know the proper reinforcement detail of lift RCC wall, go through the following video tutorial.
Source:sketchup3dconstruction.com

Continue Reading about the "Guidelines for making perfect structural design of a lift " on the next page below


Post a Comment

Previous Post Next Post