How we made Beam and column joint

How we made Beam and column joint

How we made Beam and column joint
How we made Beam and column joint
 
 
Friends in this lecture i show you we made the junction between beam and column How we bend the bars and joint them with column bars and make the two members to one member. It is very important for you to understand. So check it out.
Related Topics:

4 Comments

  1. Tell me do we need to provide columns rings at beam column junction? Our consultants scolded me coz we didn't provided rings at column beam junction

    ReplyDelete
  2. I think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article. elia & ponto

    ReplyDelete
  3. o Owns in-service equipment such as PCB (askarel) transformers and PCB Power Factor Correction.. PCB reverse engineering services Recently, doctors have begun to recognize and alert the public to the health dangers of Polychlorinated Biphenyls (PCBs), which have been used in many common commercial products.

    ReplyDelete
  4. A PCB is the acronym for Printed Circuit Boards, which are cards or circuit boards that are composed of a very thin flat metal or hard plastic-type board called an insulator. FastPCBunion.com The nature of users and their access to resources also influence the style of PCB.

    ReplyDelete

Post a Comment

Previous Post Next Post