Railway Engineering and Design Application

Railway Engineering and Design Application


The development of effective rail transport system is the primary need of any developing country and the upgrading of existing railway network system is essential for the developed countries as the capacities of railways are reached to saturation level with the passage of time. 
The railway development involves very high degree of attention by the project Authorities as well as by the Consultants, Engineers and Contractors. Any mistake May result in expenditure of a few millions which could have been avoided.
Normally the design of route alignment and the ancillary structures decide the cost of a railway project and for this job the best experienced manpower and best available tools must be deployed. HEADS Rail is applicable for Metro Railways for design speed of 135 Kilometres per Hour or more, Standard gauge, Broad Gauge, Meter gauge, any defined maximum “Cant” at Super elevated sections giving inner edge rotation, Curves with Clothoid Transitions, Earthwork Estimation, Construction Drawings, Design of rail Yards, Design of Points, Crossings, Track Diversion in case of Repairing, Curvature, Train Resistance & Haulage Capacity on Grades and Track stresses.
Download

1 Comments

  1. There couple of interesting points over time in the following paragraphs but I do not determine if I see all of them center to heart. There’s some validity but Let me take hold opinion until I investigate it further. Excellent post , thanks and now we want more! Combined with FeedBurner at the same time https://royalcbd.com/product/cbd-gummies-10mg/

    ReplyDelete

Post a Comment

Previous Post Next Post