Civil Site Engineer Must Know +100 Civil Engineer Tips And Trick

Civil Site Engineer Must Know +100 Civil Engineer Tips And Trick

Civil Site Engineer Must Know:
  • Least density of the slab should be 125 mm. 
  • Absorption of water should not be over 15% 
  • Lapping is unaccepted for the bars which contain diameter over 36 mm. 
  • Longitudinal reinforcement should be not under 0.8% and in excess of 6% of gross C/S. 
  • At least 4 numbers of bars should be used for square column and 6 numbers of bars for circular column. 
  • Minimum density of the slab should be 125 mm. 
  • Lap slices are not recommended for the bar greater than 36 mm. 
  • Water absorption of bricks should not surpass 15%. 
  • PH value of the water should not be under 6. 
  • Dimension tolerance for cubes should be +2 mm.

Source

Continue Reading about the "Civil Site Engineer Must Know +100 Civil Engineer Tips And Trick " on the next page below


10 Comments

  1. Thank you so much sir,really appreciable

    ReplyDelete
  2. Earth works qty and rcc box BBC short cut mathaed tell me sir

    ReplyDelete
  3. Sir
    Could you explain about the eart works?

    ReplyDelete
  4. Please write detail and easy way to calculate BBM.Thank you��

    ReplyDelete
  5. Why we should not prefer more than 36 mm dia bar for over laping

    ReplyDelete
  6. Why we should not prefer more than 36 mm dia bar for over laping

    ReplyDelete

Post a Comment

Previous Post Next Post